廠家轉子振動模擬試驗臺型號：ZT-1（ZT-3）

產品簡介 
本轉子振動模擬試驗臺是一種用來模擬旋轉機械振動的試驗裝置。ZT-1為單跨、ZT-3為三跨轉子振動模擬試驗臺，主要用于在實驗室模擬撓性轉子軸系的強迫振動和自激振動特性。它能有效地再現大型旋轉機械所產生的多種振動現象。通過不同的裝備組合，改變轉子轉速、軸系剛度、質量不平衡、軸承的摩擦或沖擊條件以及聯軸節的型式來模擬機器的運行狀態，由配置的檢測儀表來觀察和記錄其振動特性。因此，本試驗臺為專門從事振動測試、振動研究及大專院校有關實驗室提供了有效而方便的實驗手段。 

廠家轉子振動模擬試驗臺 
組成及技術指標 
1．調速器 
本試驗臺采用直流電動機驅動，電機軸經聯軸器直接驅動轉子，結構簡單、調速范圍寬，且平穩可靠。電機額定電流2A，輸出功率250W。 手動調整調壓器輸出電壓可實現電機0～10000rpm范圍的無級調速。 
2．試驗臺臺體： 
ZT-1：長780mm，寬108mm，高145mm，重量20kg 
ZT-3：長1200mm，寬108mm，高145mm，重量45kg 
3．轉軸、聯軸節 
轉軸直徑為Ф9.5mm，撓曲不過0.03mm，沿軸的軸向任何部位均可選作試驗中的支承點
ZT-1：配長度 500mm長軸 1根 

ZT-3：配長度320mm短軸 3根，另配于做油膜振蕩實驗的500mm長軸一根。 
聯軸節有剛性聯軸節和半撓性聯軸節供選用。 
4．轉子、平衡螺釘 
轉子有兩種規格，可根據實驗需要進行組合使用。 
轉子Ⅰ：Ф76×25mm、（800g）, 轉子Ⅱ:Ф76×19mm（600g） 
ZT-1配有2只轉子，轉子Ⅰ、轉子Ⅱ各1只 
ZT-3配有6只轉子，轉子Ⅰ、轉子Ⅱ 各3只 
轉子上有凹槽，可在輪盤任意位置安裝平衡螺釘，以便做平衡試驗。 
5．傳感器安裝 
試驗臺上配有用于安裝光電傳感器的支架，（軸端貼反光帶）可用光電傳感器鍵相。如需用渦流傳感器鍵相，可另配備帶有凹槽的軸套。 
測時，可將速度傳感器安裝于試驗臺的軸承座上。配有軸承座ZT-1為2（ZT-3為6只），測相對振動時，可將電渦流傳感器安裝于渦流傳感器支架，配有渦流傳感器支架ZT-1為1只，（ZT-3為3只）。 
6．實驗 
除以上基本振動試驗裝置外，還配有摩擦螺釘支架和油膜振蕩試驗組件（油膜振蕩軸承座、針閥式油杯、油盒），用以完成摩擦和油膜振蕩試驗。 
在基本振動試驗中如試驗臺安裝一跨轉子，轉子徑向振動用Ф8渦流傳感器測量，每個轉子可安裝x及y方向各一個測點，測點數隨轉子數而定。另可安裝磁電式振動速度傳感器和光電傳感器，分別用于軸承振動及轉速的測量。 試驗臨界轉速因跨度、轉子質量及位置等因素而各異，參考數據如下：使用500mm轉軸時，安裝兩個轉子，其一階臨界轉速約為2400rpm。 
根據試驗?zāi)康目蓪⒃囼炁_組裝成幾種不同型式。幾種基本型式可用于：驗證質量不平衡等引起的振動；驗證油膜振蕩理論；驗證自由轉子擾動.具體可分為： 
柔（撓）性轉子動平衡、 
剛性轉子動平衡、 
轉子過臨界的轉速測量、 
轉子結構形式對臨界轉速的影響、 
柔(撓)性轉子的振型、 
滑動軸承油膜振蕩、 
非接觸測量軸的徑向振動和軸向位移、 
軸承座及臺體振動測量、 
試加重進行單面、雙面、多面轉子動平衡

產品名稱：紗線動態摩擦系數測定儀 產品型號：LFY-110

LFY-110 紗線動態摩擦系數測定儀

主要用途

用于測定紗線的摩擦特性，適應于化纖長絲及其它混紡材料紗線的動態摩擦系數的測定，亦可用于皮輥等紡織器材的摩擦系數測定，是評價長絲及紡織器材摩擦系數等*的測試儀器。

儀器特征

采用絞盤法(RoLor法)測試機理，直流電機作等速引力源。                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 

高精度的測力機構；

3、可調的預張力機構；

4、全自動測試控制系統；

技術指標

1、測力范圍及精度：0～500cN±1％

2、摩擦系數范圍：0＜μ＜1

3、摩擦角可調范圍：0度～360度

4、預張力范圍：0～24CN

5、紗線測試速度：100m/min

6、顯示內容：速度、預張力、摩擦系數

7、電源、功率： AC220V 50Hz 300W

適用標準

ASTM D 3108-2013《紗線與固體材料之間摩擦系數試驗方法》

T/CNTAC 4-2017《紗線與固體材料之間摩擦系數試驗方法》